|
|
 |
| Lathes & Mills (Sherline) > Lathe & Mill Specifications |
|
|
Lathe & Mill Specifications |
|
Sherline Lathe and Mill Specifications |
|
Sherline Lathe Specifications
|
FEATURE |
4100 |
4410 |
|
Swing over bed |
90 mm |
90 mm |
|
Swing over cross slide |
48 mm |
48 mm |
|
Distance between centres |
200 mm |
430 mm |
|
Hole through spindle |
10 mm |
10 mm |
|
Spindle nose thread |
3/4"-16 T.P.I. |
3/4"-16 T.P.I . |
|
Spindle nose taper |
#1 Morse |
#1 Morse |
|
Travel of cross slide |
110 mm |
110 mm |
|
Tailstock spindle travel |
32 mm |
32 mm |
|
Taper of tailstock spindle |
#0 Morse |
#0 Morse. |
|
Headstock protractor graduations |
0° to 45° by 5° |
0° to 45° by 5° |
|
Hand wheel graduations |
0.01mm |
0.01 mm |
|
Motor |
1/3 HP DC, 90 Volts (See motor specifications) |
|
Speed control |
Electronic: accepts any incoming voltage from 100VAC to 240 VAC, 50 or 60 Hz and automatically converts it to 90 VDC for motor |
|
Spindle speed range |
70 to 2800 RPM, continuously variable by electronic speed control (Optional pulley set allows speeds to 10,000 RPM) |
|
Length overall |
610 mm |
820 mm |
|
Width overall |
190 mm |
220 mm |
|
Height overall |
150 mm |
200 mm |
|
Shipping weight |
10.9 kg |
13.6 kg |
Sherline Mill Specifications
|
FEATURE |
5100 |
5410 |
2010 |
|
Max clearance, table to spindle |
203 mm |
203 mm |
229 mm |
|
Throat (without headstock spacer block) |
50 mm |
50 mm |
Adjustable |
|
Throat (with headstock spacer block) |
Not included, but 89 mm if optional block is purchased |
Included, 89 mm |
Not required |
|
Travel, "X" Axis |
203 mm |
203 mm |
203 mm |
|
Travel, "Y" Axis |
76 mm |
127 mm |
178 mm |
|
Travel, "Z" Axis |
159 mm |
159 mm |
137 mm |
|
Hole through spindle |
10 mm |
10 mm |
10 mm |
|
Spindle nose thread |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
|
Spindle taper |
#1 Morse |
#1 Morse. |
#1 Morse |
|
Handwheel graduations |
0.01 mm |
0.01 mm |
0.01 mm |
|
Motor |
1/3 HP DC with electronic speed control (Accepts 100 VAC to 240 VAC, 50 - 60 Hz input and converts automatically to 90 VDC) |
|
Spindle speed range |
70 to 2800 RPM continuously variable with electronic speed control |
|
Width overall* |
375 mm |
381 mm |
381 mm |
|
Depth overall* |
298 mm |
356 mm |
565 mm |
|
Height overall* |
527 mm |
527 mm |
568 mm |
|
Table size |
70 x 330 mm |
70 x 330 mm |
70 x 330 mm |
|
Hold down provision |
2 "T" Slots |
2 "T" Slots |
2 "T" Slots |
|
Shipping weight |
15.0 kg |
16.3 kg |
17.2 kg |
|
Movements in addition to X-, Y- and Z-axes |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 140 mm column travel (in/out) |
*Overall dimensions include motor and speed control |
Lathe & Mill Specifications
|
|
| |
|
|
